On November 5th, the unit’s network was suddenly very forceful. It even grabbed a millet TV , and then grabbed a millet 3 by the way, and then grabbed a box of millet. Finally, Xiaomi TV and Xiaomi 3 paid for the goods, Xiaomi. The box was abandoned before it was bought.
In the afternoon of the same day, the local SF Express contacted the customer by telephone. Because the family just left for travel, they finally received the goods until Saturday (November 9). At the same time, the delivery of rice from 3 to 11.11 was really slow.
First explain the background, I small apartment, living room with a Toshiba 47-inch with a millet box, the bedroom is a Sony 40-inch LCD to buy later, and use the Sony original rack on the wall (at that time spent 270 to buy Sony original rack ) This time, Xiaomi TV is a Sony TV that replaces the bedroom. Therefore, it is prepared to replace the wall directly with Xiaomi.
Officially installed, then open the box to debug to receive 150, and then the wall is a labor fee 100, but also increase the rack fee 99, there are special mill racks for sale on Taobao, as long as 88, it is a bit to accept can not, so decide all their own Hands-on. Practice has proved that the whole process is very simple and everyone can try it for themselves.
Out of the box, millet style, a big 1 at the top of the box, starting from here. . .
“Always believe that good things are going to happenâ€, and people are very happy with the full range of literature and art.
As a LED TV, energy consumption turned out to be the lowest level 3, is a bit unjustified, is it because of the impact of built-in integrated Xiaolong processor power consumption?
Open the box, a box marked 2, should be the second step.
Put this box marked as 2 out of the rectangle. What is it?
The first is a more detailed "installation instructions", and the various steps are fairly detailed.
A power cord inside the box, a remote control, two 3D glasses.
The power line of the millet TV is a separate design, which is much more convenient than the integrated design of most TV manufacturers. Suitable for young people often move it. The remote control is the same as the new millet box and can be used universally.
3D glasses are black and red, and red is naturally scheduled by LD.
There is also a cable TV adapter and a set of screws for mounting the base.
With the foam above it, the TV body finally appeared. The first feeling was really thin. . .
The original base. Here the BS domestic TV manufacturers, the base must be added separately to buy money.
The support of the base, because my wall is used for hanging, this is not necessary to remove.
First remove the original Sony TV, put it on the bed and compare it with Xiaomi.
Sony original rack.
Obviously, Sony TV is much thicker.
Look at the back of the millet TV. It's very flat. The center is used to install the base bracket.
The interface is not rich, it can only be enough, at least some of them have. The back interface is HDMI1, VGA1, AV1, LAN1, headphone output 1, and the last TV interface.
Behind a huge MI Logo
The side interface is one each for USB 3.0 and 2.0, and then there is also one HDMI, which is just enough.
Again, the thickness difference is too obvious.
There is no interface on the left side of the millet TV
Hanging rack holes reserved on the back, with a 30 cm hole spacing, standard interface.
The long and wide hole spacing is 30cm30cm. Like Sony's, the rack can be installed directly.
Look at the hole distance of Sony TV, also 30cm
A cross screwdriver can handle it easily.
First unscrew the four screws on the back.
Compare the screws on the Sony rack with the same diameter but slightly higher. Does not affect the installation.
The rack has been installed.
Plug in the power cord and get ready for the wall.
The rack is fixed with a simple hook and it is very simple.
Installed, see the effect.
The boot-up interface is similar to the millet box and is very nice and intuitive.
Connecting a cable set-top box to watching cable TV is no problem. The effect is also good.
The main page of the boot has a picture-in-picture preview function, which can be set as a TV or other input source, which is very practical.
The last one, it is obvious that the leakage of light in the corners is very serious, but it is only obvious when it is completely black, and there is no impact on daily use.
Finally sum up:
advantage:
1, cheap, high cost performance!
2, the interface design is very good, similar to the millet box style, use very human.
3, the appearance design including the craft are very good, not inferior to the foreign brand.
4, the screen color is not bad, compared with foreign high-end brands are not bad. The panel is the focus of Xiaomi's propaganda. There is no problem in this respect, but the panel drive circuit is the key to the quality of TV display. This is also a winning weapon for foreign TV. Xiaomi estimates that it is a public version and it is also good.
5, the original with a USB3.0 interface, the actual use, the external mobile hard disk speed much faster.
6, comes with the 3D glasses, with the built-in 3D resources, the effect is not bad. Although the viewing angle is quite limited.
Disadvantages:
1. It is really hard to grab, and only a few cities can buy it now.
2. The light leakage in the corners of the screen is very serious, because it is used in the bedroom and it is obvious at night.
3. Say good original set-top box accessories have no news. Now it is still necessary to use wired set-top boxes.
4, the interface is relatively small, especially the USB interface, a total of only 2, and in accordance with the design, if you use the original cable TV set-top box accessories also occupy a USB port. In this case, it will have an impact on daily use. There are only two less HDMI, although the built-in millet box, you can save an HDMI, but PS3, XBOX360, Blu-ray players, high-definition video cameras and other equipment, it is inevitable that often plug the HDMI cable.
to sum up:
As Xiaomi’s propaganda, the young man’s first TV is really worth buying. However, in the case of the average family, the combination of existing TV + millet boxes is more cost-effective. After all, millet boxes are cheaper to upgrade, and TVs can't be changed in a few years.
Additional points:
1, for many friends said screen display problems, especially with Sony and other television issues. In fact, the home living room was at the time to spend nearly 2w to buy the top 47-inch LCD Toshiba, then in the store with the same file Sony, Sharp models for a long time, this Toshiba's display with Sony, Sharp's top flagship are Between Pak Chung. Price, cheaper 2, 3k, cost-effective to some of course, Toshiba did not give power, now has been Sony, Sharp rejection. Later, the bedroom to buy Sony's mid-range, back to boot with Toshiba's comparison, really shows a significant gap between the effect, whether it is to watch cable or high-definition movie, the two themselves put together there is a clear gap. but! However, after I placed Sony in my bedroom, I really couldn't feel any difference.
Saying so much, in fact, is to say that unless you put two TVs together, otherwise, it would be difficult for you to feel the top flagship and the normal model. For ordinary users, it is not necessary to tangled this.
The display effect of the millet TV is at home. If you don't feel it on the sensory side, you feel worse than the other Sony's and Sharp's flagships. This is why I replaced Sony with Xiaomi.
2, millet TV screen. This screen must first affirm that the color performance is really good, and even gives a little bit of amazing feeling. The problem of light leakage does exist, but in everyday viewing, the feeling is not obvious, and the picture I sent is a special case. After all, the price of the millet TV is also there.
3, on the issue with the millet box. Before my bedroom was a Sony TV + millet box, it was pretty good to use. However, the main problem is the limited space in the bedroom. In order to watch TV, a cable set-top box is added. In this case, not only is the display troublesome, but also the remote control must be three, very inconvenient. This is also the most fundamental reason why I changed my TV. Of course, my living room is still a TV + millet box, after all, more input sources, as well as amplifiers, audio, excuse for the use of millet TV is obviously not enough. This is also the reason why Xiaomi TV is positioned as the first television for young people, instead of competing positively with traditional household electrical appliances such as Sony and Sharp.
4, finally talk about using half a month's feelings. There is no problem with the screen effect. The function is powerful, and the interface and various settings are very user-friendly. Just upgraded the latest 1.0.7 stable version, the biggest problem that is discovered now is when decoding high-definition video in the mobile hard disk, there is a problem with the decoding, and the frame rate will jump! Occasionally, there is a case where it cannot be played, and re-entry returns to normal.
Gives the impression that the hardware decoding capability is insufficient, but the millet box can decode very smooth, the millet TV configuration is much higher, this problem should not occur, it should still be a software problem, can only wait for the next update .
5, the last Tucao about, as the design highlights of the touch-type power supply, because it is Andrews TV system, boot needs 5 screen will be bright, so you touched the logo, but do not know in the end is the boot does not, this caused a great deal to the user Troubled.
To add, the millet TV is the fastest one I have ever used on my Android TV. A Skyworth home has to boot for 50 seconds and 60 seconds. In millet's words, the 5 second screen is on and 10 seconds into the system.