The LED government procurement business model launched by BEE and EESL can be divided into the following aspects. First, we must ensure the quality and safety of LED lights sold in the Indian market. Second, reduce the price of LED lights. Since the beginning of this year, the government has achieved the goal of reducing the price of LEDs by launching large-scale public procurement and launching LED lamp subsidy programs. Third, the government has increased publicity efforts to cultivate public awareness of energy conservation.
At the same time, BEE will also implement preferential policies such as financial subsidies and support for the states to further promote the use of LED lights in various parts of the country. From this year on, the street lights of the Indian states will be replaced by LED lights through the government's financial subsidies.
In addition, the Indian Ministry of Power has also launched the “Demand Side Energy-Efficient Lighting Program†(DELP) in response to the “Ragiff Gandhi Plan†(RGGVY), which promotes the domestic electrification process, to promote the use of LED lights to replace incandescent lamps. The DELP program will cover 3.7 million poor families. Starting this year, each of the above-mentioned poor families will be able to purchase 2 high-quality LED lights at a subsidy of 10 rupees per household.
Not only that, the Office of the Prime Minister of India (PMO) also recommended that all government departments and their affiliates purchase only LED (light-emitting diode) lamps as the daily lighting for government departments this year. At the same time, all government departments will use LEDs from this year. The lamp replaces traditional lighting such as CFL (Compact Fluorescent) and tube lights.
Although LED lamps are more expensive than traditional lighting, their own energy saving and long service life are favored by the market. Therefore, in the long run, the widespread use of LED lights can play a dual role in saving energy and public spending.
PMO pointed out in a notice that research shows that LED lamps save 25% more energy than CFL lamps, 23% higher than traditional tube lamps, and nearly 80% higher than incandescent lamps. The energy efficiency of LED lights can be measured by the amount of electricity used in their work. For example, a 9-watt LED light produces the equivalent of a 12-watt CFL lamp or a 60-watt ordinary incandescent bulb.
Gear Reducer Motor is a small precision reducer, and the size and specification can be customized below 38mm. Shenzhen shun cheong electrical co., LTD. 15 years engaged in the design, development, manufacture Dc Gear Motor, products applicable to the smart home, widely used in intelligent robot voice interaction, children's education escort robot, intelligent sweeping machine robot, intelligent robot adaptability, independent motor, intelligent medical robot project.
Application field:
Method of use: the best stable in horizontal plane, installed on the Gear Reducer Motor output shaft parts, cannot use a hammer to knock,knock prone to press into the gear Reducer Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Gear reducer motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Gear reducer motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of gear reducer motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Gear Reducer Motor
Gear Reducer Motor,Reducer Motor,Gear Reducer Stepper Motor,Dc Reducer Gear Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com