Thermal power projects will accelerate or will benefit the cable market

Thermal power projects will accelerate or will benefit the cable market China's electricity consumption increased by 15% year-on-year in 2010, and rose by 10% and 12% year-on-year to 343,3 billion kWh and 3,124 billion kWh respectively in August of this year and the first eight months of 2011. Electricity consumption is beginning to rebound strongly in 2008 and 2009, after the financial tsunami erupted, after a slight 5% to 6% young growth. Thermal power generation is the main source of electrical energy, accounting for more than 80% of total electricity generation. It increased by 14% year-on-year in the first eight months of 2011. During this period, the average utilization hours of thermal power equipment jumped 4% year-on-year to 3,557 hours, showing excellent performance. The average utilization time of the overall power equipment is 2%. The use of hours to reach the highest level since 2007 indicates that orders will increase.

According to the data from the China Electricity Council, the estimated power gap in 2011 is 30GW. According to forecasts of State Grid officials, excess demand is expected to exceed 40 GW of supply, and this gap will further expand to 50 GW and 70 GW in 2012 and 2013. The National Energy Administration stated that in order to reduce the gap between electricity supply and demand, the approval and construction of thermal power projects will accelerate. We believe that the shortage of power will prompt the rapid expansion of thermal power generation, which will help increase the number of new thermal equipment orders for power equipment manufacturers. According to data from the National Bureau of Statistics, China’s power equipment output rose strongly by 19% and 21% respectively in August and the first eight months of 2011, compared to the year-on-year decline of 12% in 2009 and the year-on-year increase of 8% in 2010. The data is undoubtedly a significant improvement. Thermal power equipment, which accounts for about 70% of total power equipment output, rose 17% year-on-year in the first eight months of 2011.

Auto Mini Halogen Lamps

Mini halogen lamp used quartz as glass shell and filled with halogen and it is smaller than halogen headlight. The mini halogen bulb is filled halogen, so it has a better luminous power and life hour than the average medium and small light bulb. The manufacture cost of mini halogen bulb is also higher than the normal vacuum bulb. Gas filled bulb is better than vacuum bulb in many different ways. The only disadvantage of gas filled is cost. Gas filled bulb can last much longer time than the vacuum one, so gas filled bulb has better cost performance. The halogen lamp is made of tungsten, but it is enclosed in a smaller quartz glass shell. Because the glass is very close to the filament, if it's made by normal glass, it will melt very easily.

Auto Mini Halogen Lamps

Auto Mini Halogen Lamps,Mini Lamp 0.3W Colored,LED Fog Lamp,Room Decorative Lamp

Heshan Jianhao Lighting Industrial Co., Ltd. , https://www.sunclubtw.com

This entry was posted in on