LED light principle: 
LED (Light Emitting Diode), a light-emitting diode made of a Group III-IV compound, is a solid-state semiconductor device that directly converts electricity into light. The heart of the LED is a semiconductor wafer. The semiconductor wafer consists of three parts, one part is a P-type semiconductor, in which the hole dominates, and the other end is an N-type semiconductor. When a current is applied to the wafer through a wire, electrons and holes are pushed into the vector sub-well. In the quantum well, the electrons recombine with the holes, and then the energy is emitted in the form of photons. This is the principle of LED illumination. The wavelength of light, which is the color of light, is determined by the material that forms the PN junction.
The principle of light emission of high pressure sodium lamp:
The high-pressure sodium lamp uses an electric arc to generate an arc between the electrodes at both ends of the arc tube. Due to the high temperature of the arc, the sodium amalgam in the tube is evaporated by heat into mercury vapor and sodium vapor, and the electrons emitted by the cathode move toward the anode during impact. The atom of matter, which is energized to produce ionization or excitation, and then returns to the ground state from the excited state; or from the ionized state to the excited state, and then back to the ground state infinite loop, at which time the excess energy is released in the form of optical radiation. It produces light.
The high-power LED street lamp is a new type of illumination method for illuminating the LED group by DC low voltage, which has the characteristics of high brightness, good color rendering, etc. In addition, since the input of the LED street lamp is low voltage DC, it can The combination of solar energy makes solar LED street lights a potential for future road lighting.
1. About energy efficiency analysis and comparison
The lighting installation power of both should be compared in accordance with the same illumination (brightness) level and close lighting quality standards. Because the high-power sodium lamp high-power lamp (250~400W) has high luminous efficiency, it can reach 130~1401m/W, while the low-power lamp (100~150W) has about 40~1001m/W, and the current high-power LED The street lamps use 1W LED tubes, and their light effects are similar. Therefore, it is necessary to analyze the high-power street lamps and low-power street lamps separately.
(1) High-power (≥250W) street light: High-pressure sodium has high light efficiency. Considering three factors such as ballast loss, lamp efficiency and track utilization, if the overall efficiency is 0.55, the effective light efficiency of the sodium lamp is about 70~751m/W; and the effective light effect of LED street lamps is currently about 621m/W in the US, and the best domestic enterprises have reached 56~581m/W. Therefore, the ancient town Runjing street lamp feels that for high-power street lamps, LEDs are currently less energy efficient than sodium lamps.
(2) Low-power (≤150W) street light: The effective light efficiency of the sodium lamp (included in the comprehensive efficiency of 0.55) is about 45~551m/W, while the LED is still calculated according to 56~581m/W, the LED can achieve energy saving compared with the sodium lamp. %~20%, up to 30%. From the above analysis, it can be seen that the LED street lamp can save 10%~30% energy compared to the sodium lamp when the power is small (≤150W) for the branch, and the high power is still not comparable to the energy efficiency of the sodium lamp. Therefore, those who generally claim that LED street lamps are more energy efficient than high-pressure sodium lamps, and even save 50%, 60%, etc., are obviously exaggerated and speculative. We should adhere to the scientific analysis and the principle of seeking truth from facts, otherwise it will easily mislead users and the masses.
2. Analysis of the effect of light source color on road lighting
The color temperature (Tcp) of the high pressure sodium lamp is about 2100K, which is a warm color temperature. The color rendering index (Ra) is only 23~25, and the color rendering is low. The color temperature of the LED street lamp is more than 5300K, which is a cool color temperature. The product has a Ra of 70~80 and good color rendering. As the fast track and main road of the motor vehicle, the sodium lamp of the partial light is better than the white light for seeing the road surface at a distance of about 90~160m in front, especially in the foggy and dusty air conditions. Sodium lamps are more advantageous. For roads such as sidewalks, commercial pedestrian streets, residential quarters, etc., the color rendering of LEDs is better than that of sodium lamps, which distinguishes people's conditions more clearly and has advantages.
3. Economic analysis and comparison
High-pressure sodium lamps, each set is about 1200~1500 yuan; currently LED street lights, according to the size of the power, the price difference is large, about 4000~8000 yuan. As far as the status quo is concerned, LED street lights are obviously too expensive, and the price is as high as 3 to 5 times. For example, LEDs with less than 150W can save 10%~30% energy, and each lamp saves about 50~150KWh per year. It is impossible to recover the cost of purchasing lamps. It can only be expected that in the next few years, the LED development trend will see its price gradually decline, energy efficiency will be further improved, and then its economic performance will be compared.
Access Control Supply Switch Ac To Dc 12v 220v Uninterrupted Power Supply
Features:
1. Directly control electric lock to reduce the load of access controller
2. NC output can control all kinds of electric lock
3. Set up unlock button input to directly open lock
4. Automatically cut down power or burn out fuse when short circuit and other accidents happen
5. With strong anti-interference ability, excellent stability and reliability
6. Apply to all building intercom and access control systems, particularly for driving all kinds of electric locks
7. Lessen the load of access controller ,Save project wires.
8. With UPS terminal which can connect with battery.
9. Has delay control circuit.unlock delay time in 0-10S.
10. Auto protective function
Application:
This Uninterrupted Power Supplies are widely used to Building intercoms and kinds of access controllers, especially for kinds of electric locks and bolts.
Product Images:
Boxed Power Supply,Boxed Power Supply 24Vac,Cctv Boxed Power Supply,Access Control Power Unit
Guangdong Steady Technology Co.LTD , https://www.steadysmps.com