Model NO.: CX-FS
Connection: Flanged or Screw
Medium: Liquid or Gas
Brand: Gn
Working Temp: 120c
Experience: 20 Years
Quality: World-Class
Certificate: ISO,CE,SGS
Trademark: GN
Specification: CE, SGS, ISO
Origin: Shanghai China
HS Code: 9026100000
We produce various flow swich and widely used for gas and liquid. and below is the mainly model.Features:
good repeatability
hermetic separation of electrical and hydraulic components
low pressure loss
not include the bellows
corrosion resistant
magnetic switch.
Â
Application:
gaseous /liquid
The flow switch for ground-source heat-pump is mainly applicable to industrial automation/mechanical equipment/air compressing industry/ refrigeration and air-conditioner. The magnet not contact with flowing water, so can normally work in sewage discharging system.
|
CX-FS-FB Paddle Flow Switch | ||
| Diameter | DN25…DN150 | |
| Set range | 20…1800L/min(water) | |
| Repeatability | ±2.5%FS | |
| Connection | terminal type | |
| Output | Mechanical switch NO+NC(250VAC,3A) | |
| Pressure proof | 16 bar | |
| Average pressure loss: | 0.08bar( at max.flow rate) | |
| Ambient temperature | -25…80C | |
| Medium temperature | 0…90C | |
| Interface screw | G1"pipe screw | |
| Protective class | IP33 | |
| Weight | 0.55kg | |
| Material | Main body | stainless steel |
| Process connection: | brass | |
| Connection rod | brass | |
| Baffle | stainless steel | |
| Seal | Â NBR | |
| Housing | ABS | |
| CX-FS-FB12 Baffle Flow Switch | ||
| Repeatability | ±2.5%FS | |
| Connection | terminal type | |
| Output | Mechanical switch NO+NC(250VAC,3A) | |
| Pressure proof | 16 bar | |
| Average pressure loss: | 0.08bar( at max.flow rate) | |
| Ambient temperature | -25…80ºC | |
| Medium temperature | 0…90ºC | |
| Interface screw | G1"pipe screw | |
| Protective class | IP33 | |
| Weight | 0.85kg | |
| Material | Main body | stainless steel |
| Process connection: | brass | |
| Connection rod | brass | |
| Baffle | brass | |
| Seal | NBR | |
| Housing | ABS | |
| CX-FS-FPD20 Pointer display type piston flow switch | ||
| Medium | liquid or gas | |
| Repeatability | ≤±3%full scale | |
| Pressure | 200bar(stainless steel type)100bar(brass type) | |
| Output | normally open output | |
| Contact capacity | 240VAC / 110VDC 1.5A | |
| Ambient temperature | -20…70ºC | |
| Medium temperature | 0…70ºC | |
| Protection | IP65 | |
| Outlet | M12*1 | |
| Material | Electronic body | PC |
| Switch body | stainless steel / brass nickel plating | |
| Spring | stainless steel | |
| CX-FS-FR11 Electronic Flow Sensor | |
| Set range | 1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) |
| Output | PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) |
| Power supply | 24V±20%DC or 230V±15%AC |
| Switching Current | Max.400mA(PNP or NPN type ), Max.4A( Relay type ) |
| Unload current | Max.80mA |
| Flow indicator | LED (6) |
| Set type | potentiometer set |
| Proof Pressure range | 100bar |
| Temperature gradient | 4ºC/s |
| Response time | 1--13s,standard is 2s |
| Initialization time | 8s |
| Electrical protection | reversed-phase ,short circuit ,overload protection |
| Protection class | IP67 |
| Medium temperature | 20--80ºC |
| Environment temperature | -20--80ºC |
| Storage temperature | -20--100ºC |
| Connection | M12 connector /2m cable (option) |
| Material | Probe is stainless steel . Housing is PBT |
| Weight | 0.4kg |
| CX-FR-FR12 Electronic flow switch | |
| Set range | 1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) |
| Output | PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) |
| Power supply | 24V±20%DC |
| Switching Current | Max.400mA(PNP or NPN type ), Max.4A( Relay type ) |
| Unload current | Max.80mA |
| Flow indicator | LED (6) |
| Set type | potentiometer set |
| Proof Pressure range | 100bar |
| Temperature gradient | 4ºC/s |
| Response time | 1--13s,standard is 2s |
| Initialization time | 8s |
| Electrical protection | reversed-phase ,short circuit ,overload protection |
| Protection class | IP67 |
| Medium temperature | 20--80ºC |
| Environment temperature | -20--80ºC |
| Storage temperature | -20--100ºC |
| Connection | M12 connector /2m cable (option) |
| Material | Probe is stainless steel . Housing is PBT |
| Model | Connection | Notes | Accuracy | |||||||||||||||
| HFS-25 | 1″-11½NPT Screw | Red Case | 5% | |||||||||||||||
| HFS-20 | ¾″-14NPT Screw | |||||||||||||||||
| HFS-15 | ½â€³-14NPT Screw | |||||||||||||||||
| JYF-25 | 1″-11½NPT Screw | White Case | 2-3% | |||||||||||||||
| JYF-20 | ¾″-14NPT Screw | |||||||||||||||||
| JYF-15 | ½â€³-14NPT Screw | |||||||||||||||||
| Rated Voltage?Rated Amps | A.C.125~250V | Power(Cosmp.) | ||||||||||||||||
| Non-inductive Current | 12A | 1 | ||||||||||||||||
| Full Load | 12A | 0.75 | ||||||||||||||||
| Locked Roter | 72A | 0.45 | ||||||||||||||||
| Required Flow for actuating switch (m3/h) | ||||||||||||||||||
| Pipe size (in) | 1 | 1-¼ | 1-½ | 2 | 2-½ | 3 | 4 | 5 | 6 | 8 | ||||||||
| Min. Flow |
Flow lower,1-2 closed | 1 | 1.3 | 1.7 | 3.1 | 4.1 | 6.2 | 8.4 | 12.9 | 16.8 | 46.6 | |||||||
| Flow lower,1-3 closed | 0.6 | 0.8 | 1.1 | 2.2 | 2.8 | 4.3 | 6.1 | 9.3 | 12.3 | 38.6 | ||||||||
| Max. Flow |
Flow lower,1-2 closed | 2 | 3 | 4.4 | 6.6 | 7.8 | 12 | 18.4 | 26.8 | 32.7 | 94.2 | |||||||
| Flow lower,1-3 closed | 1.9 | 2.8 | 4.1 | 6.1 | 7.3 | 11.4 | 17.3 | 25.2 | 30.7 | 90.8 | ||||||||
Due to customers requirement, we opened our patent shape for LED G23 bulb light, the shortest lengh is 127mm, Power 4W, 400lm.
G23 base LED bulb also can be made as 360degree beam angle. Youtech G23 precently can not compatible with Electric Ballast, due to its space too small to put-in related driver.
G23 6W LED bulb, and G23 8W LED bulb, can exchange the base to GX23 6W LED bulb and GX23 8W LED Bulb Light. both of them can be very thin and very suitable to use as LED Plug light
G23 Led Plug Light,Led G23 8W Plug Light,4W Led G23 Plug Light ,Led G23 Plug Bulb Light
Huizhou Youtech Light Industrail Co., LTD. , http://www.youtechlight.com