ROS VRRP Single Line Multiple Dialing (RB962 hAP Setting 2)

Before the release of an original ROS original settings, deceived a lot of gold coins (signed in more than 300 days + Draw won the gold coins together, not enough for this original reward to play more gold coins). There is also time for these days, so hurry to write and then swindle gold coins. . .

This is followed by the previous one, so the name of the Interface Card is the same as the previous one. . .

Outline 1, VRRP settings 2, PPPOE settings 3, PCC settings 4, routing settings 5, speed


1, VRRP settings

ROS single-line multiple dial, you need to virtual out a few VRRP network card. . . Gossip less talk, into the subject. . . First set up a VRRP network card. . .

Open "Interface" to set

There are 3 places to pay attention to setting up VRRP:

1, "Name", arbitrarily filled, but can not repeat the name.

2, "Interface" must choose wan

3, "VRID" must be different

In addition, other parameters do not need to be modified. The default can be. . .

After setting up the VRRP card, you must set the ip address for wan and vrrp. . . .

Enter "IP" - "Addresses"

First set ip to wan, ip address is free to fill in, as long as the ip address rules can be met. . . .

Set an IP address for VRRP


2, PPPOE settings

Matters needing attention: Put the PPPOE_OUT1 dialing set in the previous original, first delete

After setting up VRRP, set up the dial-up connection and set up 3 PPPOE dial-up connections. . . Go to "Interface"


PPPOE dialing notes the following places:

1, Name random, can not be repeated

2, Interface selected vrrp1, vrrp2, vrrp3

3, fill in your dial-up account in the user, password fill in your dial-up password

4, Use Peer DNS and Add Default Route do not hook, do not hook, do not hook

At this point, pay attention to see if your vrrp card has an RM flag in front of it. . . If pppoe dials successfully, R will be displayed in front

As shown in the figure, I have dialed 2 times.

3, PCC settings

Go to "IP" - "Firewall" - "Mangle"

Built 3 dial-up connections, then do 3 connections and routing tags. Refer to the following figure to set

3 connection settings

Select "both addresses" for "Per Connection Classifier" in the Advanced tab, fill in the first text box (3 for 3 PPPOE dials, 4 for 4 PPPOE dials), and the second text box will be 0 starts to fill in, the last one is N-1 (N is your PPPOE dial-up connection number). . . . Other contents refer to pictures and defaults. . . .

After the connection is set, set the route. . .

Refer to the picture settings. The route here is used for marking. The actual route is also made in "IP" - "Routes". Keep looking down. . .

4, routing settings

Go to "IP" - "Routes". . .

There are six routes to do. 3 is related to the mark made before. . . . .

Note: Several pppoe dial-up connections are selected by the Gateway. The Distance is all 1, and the Routing Mark selects the corresponding route marker. Other reference picture settings and defaults are acceptable.

Also set 3 empty routes. . . Refer to the picture settings and defaults, but note that the Distance is not all 1, which is the corresponding settings 1, 2, and 3.

This is the end of setting up the basics. If your ISP does not limit the port speed limit, your network speed can be superimposed

5, speed

First of all, let's take a look at the speed dial test, using the mobiletest speedtest. . . Please look at the picture:

The speed after double dialing is successful, please see the figure:

Two speeds can be seen, there is not much difference, bandwidth is not. There are two main issues:

1, my light cat is a hundred trillion. . .

2. The operator has made port speed limit. . .

Please test it yourself. Some places can be superimposed, and some places have restrictions on operators that cannot be superimposed. . .



In the previous article, there were valued friends who wanted me to test the speed of the RB962. . . Make up the speed test here. . .

The test tool is red rice Note3 full Netcom high distribution version, 5G antenna value one friend. So the maximum connection rate is 433M. . . Please see the test. . .

Although it is a single-antenna 5G wifi, it is still not a problem. . . . Then I did another test. I used the es file browser to load the Blu-ray 1080P movie on the NAS and see if it can be played directly. . . Please continue to see the picture:


Mobile player with MX Player playback, playback will not card segment, the first time when loading, about 2 seconds of buffering, the middle of any drag, also need 1-2 seconds of buffering. . .


BT Headset Battery

Headset Battery,BT Headset Battery,Bluetooth Headset Battery,Headset Bluetooth Battery

Shenzhen Sunwind Energy Tech Co.,Ltd , https://www.sunwindbatterylm.com

This entry was posted in on