Let your box automatically power off, say goodbye to the new Tate

I have found that many Tate users are tangling up with a problem, that is, they want to complete the remote control with a simpler operation. Some users say that the Tektronix box remote control is turned off, but the standby power consumption does not consume power, and some users put it. The power cord is plugged into the TV's USB port for power, but it's also worrying that the box will not be broken because of lack of power supply. Some users use audio equipment. Every time you turn off the TV, you still need to press the row button manually. It's very troublesome. Today, I'll give you a new way to play. These issues are all unified. Needed tools: TV, Tate box, these two are the protagonists, but the next one also needs a product, TV dedicated smart plug

I have two TV-specific smart sockets in my hand. I can say that each has its own advantages and disadvantages. I will give you a brief introduction today and I can give more people a reference.



White on the left is Huntkey TV Companion. Black on the right is the Phi Smart Plug. Both products are priced around RMB 100.




See above, I will explain one by one, the left three plugs are audio plugs, Tate box power plugs, TV plugs

1. Real Smart P1



See the figure, plug the TV plug into the TV interface, and plug the box power and audio power into the linkage interface. The long-pass interface and the UBS interface can connect to the router or mobile phone charger, etc., and the sockets will be powered on (the first use requires manually pressing the socket Right-most power button, only used for the first time, no need to press again in the future)

The next time no operation is performed, the power strip will be powered off, as shown below



In the figure above, the three buttons on the right side of the row are all off, and the connected device is also defaulted to the power off state, but the two on the left side of the row are in power-on state, and the real-time P1 does not need to pair the TV remote control. Press any button on the TV remote control, you will hear a click and the three ports on the left side of the socket will start to power on


It can be seen that the TV power is on, the power of the Tate box and the audio power are all on, and then press the TV remote control power button again


TV is on

If we want to turn it off, it's very convenient, just press the power button on your TV's remote control






At this time, the TV is turned off, but don't worry. The two linkage ports connected to it will automatically shut off in about 30 seconds. You can sleep in bed and you don't need to get up and turn off the TV power supply.


2. HuntKey TV companion


The leftmost is the main control, that is, the TV power jack. The two next to it are controlled. You can plug in the box power and audio. The last two are smart sockets. You can see the rightmost button and press down. State Description The two interfaces on the right are automatically powered off when the power supply is interrupted. The status of the upward push is uncontrolled, that is, the power supply to the connectors is off. The two interfaces are also powered.

The usage method is similar to that of real intelligence, but the first use needs to be paired with the TV remote controller.



With this connection, the strips are powered on, and the green light flashes continuously. At this time, press the TV remote control power supply. The green light goes out and the pair goes off.

Then press the TV remote control button again, the TV turns on





When you close, press the TV remote control power button, the TV is off, about 3-5 seconds or so, the socket automatically power off


Some of the above operations are only in trouble for the first time, but after the normal use of the state is to press the TV remote control power button, the plug will be powered, and then press the TV remote control power button again, the TV is switched on, shut down just click TV remote control power button, shut down to sleep, the socket will automatically power off

It can be said that both of these slots can be used with the Tate box, but each has its own advantages and disadvantages. I simply say

Compared to Huntkey P1's multi-USB port, the Mighty P1 does not require pairing. Any infrared remote control can be turned on after testing. The disadvantage is that it is too sensitive. After testing, at night, suddenly turning on the light, the power supply will be turned on. This is very annoying. , If the connected sound suddenly rang, it will startle, there is the real power P1 automatic power off for about 30 seconds, personal feeling is a bit long

Huntkey partner is two smart jacks on one side of the real-world P1. It can be switched on or off. It can maintain power-on status and is free to choose. The automatic power-off is actually short, about 3-5 seconds. Suitable, the disadvantage is no USB port

After some introductions by me, is it not convenient to use the plug and row together with the Taijie box? This will not cause the TV USB port to burn out the box because of fear of the power shortage of the TV USB port, and will not have to worry that the box will always stand by, which will affect many people's problems. The more important thing is to sleep at night without having to get up and turn off the TV power supply, and feel at ease (because many TVs only turn off the remote control, the TV power light is always on, and after testing, this is really power-consuming)

PS last point: If the box remote controller also has infrared features, we can imagine, is it right? Can bid farewell to the TV remote control, a remote control all get, looking forward to ~~~

12V Lithium Battery

12V Lithium Battery,Lithium Ion Battery 12V 50Ah,12V 50Ah Lifepo4 Battery Pack,12 Volts Lithium Ion Battery Pack

ShenZhen UFO Power Technology Co., Ltd. , https://www.ufobattery.com

This entry was posted in on