At present, the world's advanced assembly process uses a new type of material, solidified mud, which is filled between the lamp tube and the lamp holder. The solidified mud is expanded and solidified at a temperature of 120 ° C, thereby the lamp and the lamp holder. Firmly fixed in one piece, as if cement were used to secure poles. Famous companies such as GE, Philips, and Matsushita of the United States use such solidified mud. The energy-saving lamp assembled by using this assembly process and material has a beautiful appearance, long-lasting durability, and greatly improved yield, and has the following advantages: 1. The expansion curing at high temperature is an irreversible chemical reaction, so in the future, under high temperature and high humidity conditions, the lamp There will be no looseness between the tube and the lamp holder. 2 and the curing time is short, only about 5 minutes at 120 ° C, the production efficiency will be greatly improved, and labor is greatly saved, and the production site can also be fully utilized. 3 Because the solidified mud is evenly injected into the lamp holder by using a special solidified mud injection machine, the special solidified mud injection device can ensure the solidified mud injection amount (2.0±0.3g), so the lamp tube is evenly stressed and does not generate stress. Therefore, there is no crack and air leakage, ensuring a long service life. 4Because of the regular assembly fixture, the verticality of the lamp tube and the lamp holder is good (<1.5°). 5 After the solidified mud is solidified, it is as strong as the cement fixed electric pole. Therefore, the lamp tube and the lamp holder can withstand 5 Newton meters. Torque is not loose, and the pulling force of 30kg does not fall off.
1
1
Half Spiral Energy Saving Lamp
Sunhe Lighting Co., Ltd , http://www.dgledlight.com