Eight taboos using a broadcast microphone

Nowadays people have a lot of opportunities to use the microphone, but not many people can really use the microphone. Let's talk about what we often see. The so-called "useful" is nothing more than a good pickup effect, a long service life and no harm to health. A few big mistakes are also contraindicated in our use.
1. Avoid tapping the microphone and blowing into the microphone during the test. Because the pickup part of the microphone is more precise and the parts are very delicate, it is easy to cause damage or component displacement when the microphone is blown or blown to the microphone head, which ultimately affects the sound quality.

2. Avoid the microphone leaving the sound source too far. The best distance when the microphone is picked up is about 10 cm. Some "leadership" speeches are far away from the microphone. Some singers stick to the microphone, and the sound of the pickup is too small. If the volume fader is pushed up, it will easily cause whistling; if it is too close, it will be spoken. The sound of the air is also picked up, causing a "beep" noise.

3. Avoid pulling the microphone lead when you submit the microphone to the microphone. Since the microphone has a certain weight and often pulls the lead wire, it is easy to cause the lead wire to be broken, and the plug contact is not good, resulting in a pickup failure.

4. Do not turn off the microphone power after using it. When the meeting is finished or after the singing is finished, the microphone switch should be turned off in time. At this time, the sound controller does not turn off the mixer volume fader in time: on the other hand, other noises are also picked up. Go in, and on the other hand, play some unnecessary speeches. President Bush has had such an experience and caused embarrassment.

5. Avoid sticking to the microphone and use some people to pay attention to or pursue a close-up effect. Often the mouth sticks to the microphone, but it does not know that this not only destroys the normal frequency response of the microphone, but also poses a great hidden danger to health. There are many germs on the microphone net cover.

6. Avoid using the microphone for a long time, do not exit the battery. Now the general wireless microphone or conference microphone needs battery power. If the microphone is not used for a long period of time, the battery should be removed to prevent the battery from leaking and corroding the microphone.

7. Avoid placing the microphone at random. It is a precision equipment. It should be placed in a clean, dry, non-corrosive gas or dust. It should also be handled gently. It must be avoided on the ground, otherwise it will be damaged in all likelihood.

8. For condenser microphones, avoid blind and phantom voltage. Since the capacitance of the condenser microphone needs polarization, it can work normally. Therefore, when using a condenser microphone, phantom voltage must be added. We must open the phantom power switch on the mixer, and pay attention to the voltage value and polarity. Otherwise, it will not be used normally and may cause damage.

Lithium Ion Battery has many advantages we have known.

1.Self-discharge is small, under 2% per month (recoverable). 

2.No memory effect. 

3.The operating temperature range is -20℃ ~ 60℃

4.Excellent cycle performance, always more than 2000 times. 

5.Fast charging and discharging, charging efficiency up to 100%.

6.Large output power. 

7.Long service life. 

8.Not contain poisonous and harmful substances and is called green battery.

48100 LiFePO4 Battery

Rechargeable LiFePO4 Lithium Battery,48V LiFePO4 Battery,100Ah Rechargeable LiFePO4 Battery,48V 100Ah Battery Pack,Lithium Iron Phosphate Battery Pack,48V 100Ah Rechargeable Li-ion Battery

Shenzhen Enershare Technology Co.,Ltd , https://www.enersharepower.com

This entry was posted in on